The Garmin Fishfinder 400C is a great fish-finder to inland fisheries. It can also be used for saltwater fishing, but you need an update on a separate double-drive. With its bright color display high resolution Garmin fishfinder will help you easily find fish, even in bright sunlight. The display has a backlight, which enables easy operation while traveling at night your fishing.
The Garmin Fishfinder 400C has aDual-Beam-80/200 kHz converters, which allows depth of penetration up to 900 meters. (Note that turbid or cloudy water can reach the exact depth to reduce the fish finder.) This converter is more suitable for fishing in inland waters because of its depth.
The dual-beam transducer provides an angle of 45 degrees cone setting 80 kHz and a cone angle of 14 degrees set 200 kHz. This feature allows you to view a wide range of backgrounds and will help lower the area ofdifficult to see the fish in the deepest depths.
If the fish in salt water is in your future, you may want to update a separate dual-frequency transducer. The dual-frequency model to penetrate up to 1500 meters and has cone angle of 45 degrees and 10 degrees, depending on the setting. As for the dual-beam transducer to display a larger area and more shallow depths, but with this converter you can, this place is hard to see the fish at depths approaching 1500 feet.
IfChoose to fish in fresh or salt water, which GARMIN FISHFINDER can be a great tool for you to catch.
Remember that this model is equipped with a dual beam transducer, but you can buy a dual-frequency converter, if desired.
fish finder tips
There are some things to consider when cleaning the fish finder display. First, you should get used to, and clean the fish finder screen after each fishing trip. These best practices, along with the following tipswill keep it in good condition longer.
When cleaning the unit, the body (except the screen) with a damp cloth and mild detergent. Then dry. Do not use chemical cleaners or solvents as they may damage plastic parts. To clean the screen with eye glass cleaner and a dry cloth. The reason for using this type of cleaner is because it shows fish finder, in general, have an anti-reflection coating. Detergents, ammonia, anti-fat, Detergents, alcohol or abrasives will damage coating to use a glass cleaner eye that expressly provides that it is for the use of anti-reflective surface.
Most fish finders are also water resistant and can survive for a short time under water. (Consult your manual to be sure of the model.) Be aware, however, that immersion can be used for a long period of time (usually about 30 minutes) irreparable damage to the device. If sonar is submerged, wipe with a clean cloth andthen let it air dry before the next fishing trip.
0 comments:
Post a Comment